EDUCATIONAL TRAINING SYSTEMS

Model:ZIGBEE

ZIGBEE TRAINER KIT

 

 IC SPECIFICATION

  • RF Data Rate  250kbps
  • Indoor/ Urban Range  300ft (90m)
  • Outdoor/ RF Line-of-sight Range  2miles(3200m) / Int’l 5000ft (1500m)
  • Transmit Power  63mW(+18dBm) / Int’l 10mW(+10dBm)
  • Adjustable Power  Yes
  • I/O Interface  3.3V CMOS UART, SPI, I2C, PWM, DIO, ADC
  • Configuration Method  API or AT Commands, local or over-the-air
  • Frequency Band  2.4GHz
  • Serial Data Rate  1200bps – 1Mbps
  • ADC Inputs (4) 10-bit ADC inputs
  • Digital I/O  10
  • Operating Temperature -400C to +850C, 0-95% humidity non-condensing
  • Memory  128-bit AES
  • IDs and Channels  PAN ID,64-bit IEEE MAC, 15 channels
  • Transmit Current  220mA
  • Receive Current  62mA
  • Power-Down Current  4uA @ 250C

 DEVELOPMENT BOARD SPECIFICATION

  • Built-in XBee Pro
  • Built-in RS232 9 pin ‘D’ type Connector
  • Built-in USB Connector for Programming Configuration
  • Built-in 3.3V Regulator
  • Built-in Connector for Analog input (AD0 -  AD5)
  • Built-in RMC Connector for Digital I/O (D0-D5)
  • Built-in RMC for PWM port
  • Built-in Switch for Controlling  Sleep mode

 DATA LOGGER
 Specification

  • Built in USB For Programming XBEE2B.
  • All pins are taken to 2 Nos of single line connector.
  • USB Powered.
  • User can Read and Write Onchip flash content of XBEE.

Description

Before Using Wireless module, the configuration data should be loaded into flash memory. This USB Dongle helps user to load configuration into flash. User can also interface devices through built-in single strip connectors.

logo footer