EDUCATIONAL TRAINING SYSTEMS

Model:WLC 

WATER LEVEL CONTROLLER

WLC

Objectives

  • To design a controller that makes the liquid level in the holding tank to track a desired set point level

Features of the Trainer

  • Compatible with MCS-51™ Products
  • 4K Bytes of In-System Reprogrammable Flash Memory
  • Endurance: 1,000 Write/Erase Cycles
  • Fully Static Operation: 0 Hz to 24 MHz
  • Three-Level Program Memory Lock
  • 128 x 8-Bit Internal RAM
  • 32 Programmable I/O Lines
  • Two 16-Bit Timer/Counters
  • Six Interrupt Sources
  • Programmable Serial Channel
  • Low Power Idle and Power Down Modes
  •   Reset Switch To Reset Both Controllers.
  • Control The Level Of Water In A Tank System
  • Two Float Sensor Are Provided For Measuring The Level 
Built in Regulated Power Supply DC +5V/300 mA.
Power Supply Voltage range : AC 100V - 230V.
Frequency Range : 50 - 60Hz.
Housing It is mounted in an elegant ABS Plastic cabinet for better viewing and portability.
Dimension 29cm x 20cm x 11cm
Weight 1.5kgs

This trainer is a glass-epoxy printed circuit board and all the symbols screen-printed on the front panel so that it enables the student to conduct the experiments easily

Accessories:

  • 2mm multi coloured moulded patch cords with daisying facility.
  • Computer simulated outputs and Step-By-Step detailed instructions are provided with the instruction manual.
  • Water tank

 

logo footer