EDUCATIONAL TRAINING SYSTEMS

MICROWAVE TRAINING SYSTEM(KLYSTRON TUBE) - MWT

 

micro

 

 

Model: MWT

MICROWAVE TEST BENCH:

KLYSTRON POWER SUPPLY (Specifications):

Klystron powers supply generates voltage required for driving the reflex klystron tube like a source of microwave energy. It is absolutely stable, regulated and short circuit protected power supply. It has built-in facility of square wave & saw tooth generators for amplitude and frequency modulation.

Beam Voltage 220 to 450mA
Beam Current 50mA
Operating Voltage 300 V (approx).
Reflector Supply 7 to 250 Volts
Modulation Internal Square Wave 800 to 2000Hz with variable frequency & amplitude. Saw Tooth wave 15000-35000Hz variable frequency & amplitude.
Mains 230 VAC, 50Hz, 115 watts approx

VOLTAGE STANDING WAVE RATIO METER (Specifications):

It is a high gain voltage amplifier tuned at the center frequency of 1KHz. It is used for measuring VSWR, Attenuation and total mismatch on the line.

Amplifier Type High gain tuned at one frequency.
Frequency 1000 Hz.
Sensitivity 0.1 Micro volt at 200 ohms for full scale.
Band Width 25 to 30Hz
Range 60 db min. in 10 db scale.
Accuracy 0.15db on one range.
Meter Linearity 1% of full scale.
Scale- Selector Normal, Expander.
Gain Control Coarse & fine.
Input BNC (F), 2000 ohms impedance.
Input Selector Crystal, ( 4.5mA ) and high ( 8.75mA ).
Mains Power 230 VAC, 50Hz

EXPERIMENT FOR KLYSTRON TUBE:

  • To study the characteristics of the reflex Klystron tube and to determine its electronic tuning range.
  • To determine the frequency and wavelength in a rectangular waveguide working TE10 mode.
  • To determine the standing wave ratio and reflection co-efficient.
  • To measure an unknown Impedance using the smith chart.
  • To measure the polar pattern and the gain of a wave guide Horn antenna.
  • To study the function of multi-hole directional coupler by measuring the following parameters. Mainline and auxiliary-line VSWR.
  • The coupling factor and directivity of the coupler.
  • Study of Magic Tee.
  • To study the Isolator and circulators.
  • To study the attenuator.
  • To study the dielectric constant measurement
  • To calibrate phase shifter.
Power It is operated on 230VAC/50Hz.
Housing It is housed in an elegant metal cabinet (CNC Machine Finish)
Accessories Cables, Screw’s & Nuts.
Instruction Manual Trainer comes with detailed instruction manual.

SHIPPING : FREE WORLDWIDE EXPRESS SHIPPING BY UPS
Customs duty, taxes and other incidental expenses to be borne by customer at the time of delivery.

logo footer